First 5" build. Durable yet cheap frame, lower-end parts, AIO FC to save on space/weight and allow for upgraded HD cam/DVR.

NOT the final camera mount in first couple photos, just wanted to get it positioned for a quick test flight. Trouble with HGLRC FC, wouldn't power up with battery, but USB seems fine. Contacted HGLRC and am working with them on a solution.

7-1-18 Check out my youtube channel for some videos. Most recent with Tattu 1550mah battery:

4-20-18 Have had this up and running for almost a month now with the new board ordered from Amazon. The new board seems of higher quality, and definitely WORKS. The original may have been a lower quality board, or even maybe a knockoff--starting to rethink the Banggood route.

So far it has been crashed at least a coupld dozen times, been in a tree for a week with several days of rain, and dunked in a puddle with not much more than broken props. (last photo) Oh, and two ruined batteries, one from a crash on concrete, other from being in a tree for a week.

Without any tuning, this thing files great, and has taken an absolute beating without much damage other than the top plate where the antenna connects--I will probably end up running the antenna out the back.

Finally got a decent camera mount: http://a.co/hCP3KS7
Took a little bit of ingenuity to get it to mount properly, but it's farily solid and gets a decent tilt. (3rd photo)

3-17-18 Ordered another HGLRC F4 V5PRO just because all my wires are cut to fit. Still in contact with HGLRC to find resolution to problem, but not real hopeful there. Maybe I'll get a replacement from them, maybe not. Going to be EXTRA careful with heat on the board this time around, and probably do some tests before I even start soldering.