Rotor Riot! Remix by Ummagawd

By Quadxl on Feb 18, 2018

15  1,386  9

Here is my current build from Rotor Riot! The Remix by Ummagawd.
This build was so fun, easy and fluent. There is so much space for all HW and it all went pretty smooth.
Build weight is around 380gr (include the session mount).


Part List


"The Remix" FPV Freestyle Frame by ummagawd (Gold) (17 builds)

Flight Controller

Anniversary Special Edition Racerstar REV35 35A BLheli_S 3-6S 4 In 1 ESC Built-i


4 x BrotherHobby Returner R4 Motor 2206 2300kv and 2600kv (3 builds)

FPV Camera

RunCam Swift Mini (3 builds)

FPV Transmitter

TBS UNIFY PRO 5G8 HV (RP-SMA) (82 builds)


TBS Triumph RP-SMA (RHCP 2pcs) (58 builds)


XM PLUS (2 builds)
See Site

HD Camera

GoPro HERO5 Session (267 builds)
Show stores (7)


Sign in to comment

quadreaver   Aug 06, 2019  

Have the same quad with R5 Deadpool motors, a radix fc and the same gopro mount and a lot of vibration issues in my HD footage. PIDs are from Tommy. Any advice?

Quadxl   Aug 06, 2019 

I actually sopped using this quad. I'm now flying Multicopter Builders Epic 262v, it's a 6" and with 5S 2200mah I get 9-10min cruise.

RZFPV   Feb 18, 2018  

Did you find a way to get the props out of view and also how are the bh 2206s holding up with the GoPro and battery weight?

Quadxl   Feb 18, 2018 

It has pretty much strength and power yet it keep efficient. 35deg and still seeing some props. I think I will take the gopro 5deg more.

Quadxl   Feb 18, 2018 

Delete your other duplicate message.

Beastie Builds   Feb 18, 2018  

Beautiful build! Obviously not your first

Quadxl   Feb 18, 2018 

Thanks bro!

Beastie Builds   Feb 18, 2018 

Hey do those skinny arms look durable?

Quadxl   Feb 18, 2018 

So far yes.

Guides & Reviews

27 1,299  11
18 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
43 4,845  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more