Girly Japalura HD

By Pimpmykwad on Mar 05, 2018

25  1,191  2

Here is my Girly Japalura HD !!! with all options: smartaudio, smartport....and HD with the runcam split. It was a bit tricky to put all the stuff in a so tiny place....but the final is just beautiful!

You have to put the Runcam Split board just on nuts...dont use standoff, because the tower would be too high. So you have to put the starp and the battery on the top.


Part List


4 inch (2 builds)

Flight Controller

HGLRC XJB F425 Flytower F4 Flight Controller - $58.32 | (12 builds)


4 x 3B-R 1606 3200KV 3500KV 2-4S Brushless Motor for RC Drone FPV Racing (3 builds)


2 Pairs Gemfan Flash 5152 5.1x5.2x3 3 Blade CW CCW PC Propeller for 180 250 280 for RC Drone (31 builds)

FPV Camera

RunCam Split 2 FOV 130 Degree 1080P/60fps HD Recording Plus WDR FPV Camera NTSC/PAL Switchable (81 builds)

FPV Transmitter

AKK FX3 5.8Ghz 25mW/200mW/400mW/600mW Switchable FPV VTX with MMCX Integrated OSD FC Configuring via Betaflight Flight Control B (16 builds)


Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (230 builds)


FrSky R-XSR SBUS 2.4GHz Micro ReceiverDefault Title (845 builds)


Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack (XT30) (34 builds)


FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (50 builds)



HD Camera

GoPro HERO6 Black - Waterproof Digital Action Camera for Travel with Touch Screen 4K HD Video 12MP Photos (5 builds)

Misc Parts

PLA 20mm to 30.5mm Mounting Hole Conversion Board Black for RC Multirotor FPV Racing Drone (3 builds)

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (144 builds)

Radio Module

TBS Crossfire Micro TX V2 (107 builds)
Show stores (9)


Sign in to comment

Jodie Froster   Mar 06, 2018  


Pimpmykwad   Feb 28, 2018  

The frame is entirely hydrodipped and coated with an ultra durable 2K coating.

Guides & Reviews

39 3,861  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,704  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more