Building a Le Hyphy using all new technology.

https://hyphymultirotors.com/product/le-hyphy

3/27/18 - collected Frame, FC, and ESC's so far. I have the Motors and camera on the way.

3/30/18 - Motors and camera arrived but the little gummies I bought to hold the camera will not fit the Hyphy standoffs. they're too far apart and hexagonal. The Whocares cam does not come with a mounting solution or an OSD toggle. I'm going to steal the Runcam Swift mount that am using on my 3 inch and use the gummies on it. The Samguk motors look great and come with a little story about Chinese history inside the boxes. I'm hype about the whole Three Kingdoms story so reading a tale in badly translated Chinese is right up my alley. The Samguks come with five 6mm long M2.5screws and two extra "C clips". The motor wires are super long and I feel like an idiot having to cut so much of them off for dang ARM escs. I have 2 of the 4 motors soldered to the pads but they're pretty thick wires. I may go back to the chisel tip for the other 2 and maybe redo the first two. The ESCs from Amazon have a Telemetry pad but you have to solder your own wire into it. That means cutting off the Heat Shrink and then finding a new solution. That's not my strong point. I wrapped the arms with E-Tape and covered the completed ESCs with black shrink. i'll eventually be using zips to hold them down.

04/02/18 - Ordered the Mach1 VTX from RDQ along with some blue 5046 props.

10/28/18 - SOLD to Siderala