ultralight 1

By painfpv on Mar 10, 2018

1  121  0

xbee-x v2 ultra light build. this is the quad that I prefer to fly when I am not flying a gopro.

Photos

Part List

Frame

XBEE-X V2 220mm Frame (Titanium) (6 builds)
Crowncityfpv.com
$39.99

Flight Controller

Asgard AIO Flight Controller (F4 FC, 4x 25A ESC, OSD, PDB, Curr) (9 builds)
Getfpv.com
$87.99

Motors

4 x ZMX FinX23 FR05-2.6K "IJN Umikaze"
Silver-drone.com
$114.04

Propellers

HQ 5x4.3x3 V1S (2CW+2CCW) PC **Choose Color** (375 builds)
Pirofliprc.com
$3.69

FPV Camera

RunCam Micro Sparrow WDR 700TVL 1/3 CMOS 2.1mm FOV 145 Degree 16:9 FPV Camera NTSC/PAL Switchable (66 builds)
Banggood.com
$20.99

FPV Transmitter

TBS Unify Pro Nano 5G8 (93 builds)
Team-blacksheep.com
$19.95

Antenna

TBS Unify Pro 5G8 Linear Antenna (5 builds)
Fpv-direct.com
$6.95

Receiver

Team BlackSheep TBS Crossfire Nano Receiver (SE) (337 builds)
Airbladeuav.com
$29.99

Batteries

Turnigy Grafeen 1000mAh 4S 65C Pack Lipo w / XT60 (3 builds)
Hobbyking.com
$20.90

Radio

FrSky 2.4G 16CH Taranis X9D Plus Transmitter SPECIAL EDITION w/ M9 Gimbals (50 builds)
Getfpv.com
$249.99

Radio

TBS Tango 2 Pro - FPV RC Radio Drone Controller (23 builds)
Team-blacksheep.com
$199.95

Goggles

Fat Shark Dominator HDO 2 FPV Goggles (22 builds)
Getfpv.com
$499.99

Goggles

Fat Shark Dominator V3 FPV Goggles (57 builds)
Getfpv.com
$299.99

HD Camera

GoPro HERO6 Black (9 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO8 Black Action Camera (9 builds)
Getfpv.com
$399.99

Video Receiver

Furious True-D V3.5 Diversity Receiver System Firmware 3.8A (FatShark Attitude Version)SKU: FPV-RX-TRUD3.8A (27 builds)
Furiousfpv.com
$68.00

Video Receiver

TBS Fusion Receiver Module For Goggles (5 builds)
Phaserfpv.com.au
$143.40

Radio Module

TBS Crossfire TX (15 builds)
Rc-innovations.es
$229.91
Show stores (12)

Discussion

Sign in to comment

Guides & Reviews

29 1,577  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,038  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more