By Simon on Mar 19, 2018

9  577  2

This most recent Racer I built is my first try to use an AIO FC and some better motors than I was used to. Getting the Stack low enough became a challenge, because the M3 screws that come with the frame are not long enough to get the FC real low. This is important, because else it would not be possible to get the the USB-Port that is located below the camera.
The complete build isn't light weight as it weights 326g as seen on the builds. For an AUW you have to add the LiPo to that.

However, a very nice surprise was, that this build is very nicely maintainable. To work on the inner stuff I simply have to remove the camera and loosen the screws holding the canope. Everything is layed out nicely and well-reachable then.



Sign in to comment

Simon   May 03, 2018  

Yesterday, I finally disassembled the build. I was simply not able to make this fly... Maybe the Gyro of the AIO is broken. I already talked with so many specialists about this issue and nobody had an idea.
I will now take the electronics, replace it with a 4in1 esc and a separate FC and put it into a Mito F2 frame.

The Van   Mar 19, 2018  

Very nice! That frame is pretty sweet, sorta reminds me of the GT2

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more