This is a version of the Chameleon Ti with ESC 4in1, on a clean build with all features

I wanted a clean build, but also having all the features.
It has:

• Betaflight OSD
• 32kHz Gyro et FC
• SmartPort Telemetry
• VTx setting by OSD or LUA script
• Audio from the cam
• Runcam RotorRiot settings by OSD
• LEDs and Buzzer

I choosed to get the XT60 wire coming from the front of the frame. Like that the build is very clean and there is no wire from the battery that can go and get destroy into the props. The way the XT60 wire is leaving by the side make it isn't bothering the HD cam at all.
Because of the XT60 wires coming out in the front part of the frame, I rotated the ESC of 180°, so I only needed to cross the ESC wires signals from the FC to the ESC.

I changed the VTx plate for this nice 3D printed part which allow to have a 45° VTx antenna mount and a better and more solid RX antenna mounting system. Here is the link of the 3D part: https://www.thingiverse.com/thing:2759468