By TheMrJahn on Jun 13, 2018

13  522  2

This is ultimate racer. I tried to get maximum performance and efficient from this drone. First of all descided to use Airbot Matrix PDB to gain 5800uf capacitors total amount. Choosed HELIORC SPRING IMU-F flight controller with dual processors to get only 14% cpu utilization with 16/16 pid loop/gyro and dshot1200. Formula 32 are best ESCs from EMAX - they will give all needed power to motors. Hypetrain Freestyle 2306 2450KV Motor V1.1-EZO - are very efficient and full of thrust. This drone will give a lot of fun in freestyle and maximum advantage in racing. Named this build "Ghost"!

Installed ButterFlight 3.5.1 Odin. Q on all axis set to 3000. W - 32. It flies perfect!



Sign in to comment

QuadX   Jun 14, 2018  

How do you like the flow props? Whats amp draw like?

TheMrJahn   Jun 16, 2018 

They are more efficient than emax 5050, and quite fast (but slower than 5050). Just had testing this build in the field (using TattuR-Line battery)- max current was about 100mAh. It’s a good result for such build.

Guides & Reviews

27 2,075  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more