MORE Massive Droner 3"

By flying toaster on Apr 24, 2018

19  2,342  17

DSHOT 1200
ESC Telemetry


Part List


MORE Massive Droner 3 inch (28 builds)

Flight Controller

OMNIBUS F4 Nano v5 with LC filter (3 builds)


Ori32 4in1 ESC 4x25A 2020 (2 builds)


4 x DYS 1404 BE1404 4300KV 6000KV 2-4S Brushless Motor For RC Drone FPV Racing Multi Rotor (15 builds)


HQ T3x3x3PC

FPV Camera

RunCam Micro Eagle (323 builds)

FPV Transmitter

TBS Unify Pro Nano 5G8 (97 builds)


Lumenier AXII U.FL 5.8GHz Antenna (RHCP) (148 builds)


FrSky R-XSR Tiny 16 channel with Redundancy (937 builds)


Lumenier Graphene 700mAh 4s 75c Lipo Battery (XT-30) (10 builds)
See Site
Show stores (8)


Sign in to comment

Rice_Bowl   Dec 28, 2018  

do you get any problems with the bearings? i bought a set and i think 2 of them sucked. But im not sure if thats quality control or if my VERY FIRST crash was THAT hard. My first me it was that bad but it bent 1 motor (which later i noticed was because of the bearings). idk do you have any troubles with your motors?

flying toaster   Jan 03, 2019 

I had a similar issue with the RX1404 v1's. It seemed like every crash I would bend a motor shaft. I've noticed these motors aren't quite as smooth but they've been more reliable for me.

Rice_Bowl   Dec 07, 2018  

does those motors get hot in 4s on a 3"?

flying toaster   Dec 08, 2018 

They get a little warm on 4s but not too bad definitely what I prefer to use.

Rice_Bowl   Dec 08, 2018 

yessss thanks dude! im planning to make a new quad with those motors. you think a 550mah 4s can do 3mins of freestyle?

flying toaster   Dec 08, 2018 

Lol no problem. I'm using a 650mah 4s and getting 3+ minutes. You could probably get 3 min with a 550mah but it also depends on your AUW.

BlueOverBrown   Nov 19, 2018  

how did you manage to get the antenna tubes to stay in the holes? Ive tried a few different things, no luck yet. Id rather not glue them in but i will if I have to.

flying toaster   Nov 20, 2018 

I used glue lol you only need a tiny bit

DEinDEad   Apr 24, 2018  

What is your flight time like on this ship?

Show 2 more comments
flying toaster   Jul 31, 2018 

Motors get a little warm on 4s with BF 3.3.3 and a fairly stock tune. If you're interested I'd say pull the trigger I don't think you'll be disappointed.

jvphotog   Aug 08, 2018 

nice build! was also looking at these motors. any idea why Albert Kim got 12 minutes of flight time on these motors in a heavier frame?

flying toaster   Aug 08, 2018 

Thanks! I just checked out his video. It looks like he's using a large 850mah battery with a lower C rating, and is also just cruising around to see how long he can fly. The times I estimated were for regular agressive flying.

gottjas   Jul 09, 2018  

How is the power from the dys 1404? I'm trying to decide between these, the airblade superman 1404, and the rotorx 1404 on the More Massive Droner. I want efficiency and long flight times, but still want enough power to do acro. Thanks!

flying toaster   Jul 31, 2018 

Sorry for the late reply. The dys 1404 has a bit more power on 4s than the rotorx 1404 but is also less efficient. Build quality is great for both motors. I was bending the shafts on my rotorx 1404 v1's but that has been addressed with the v2. If you're not bothered by the price I'd probably lean towards the rotorx 1404 v2 because you'll get longer flight times and still plenty of power on 4s. The superman's probably fall in the middle in terms of thrust and efficiency (4300kv vs 3850kv vs 3600kv).

gottjas   Jul 31, 2018 

Thanks for the info! I ended up going with the Airblade Superman 1404. I'll be building it soon - super excited!

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more