First 5" build after 2 1/2 years of flying. The build pics are a little disjoint, and I've replaced the antenna tubes with a solution that's a bit more durable and maintainable (the black antenna tubes in one of the pics). I have a 5v regulator attached to the Freestyle F4, since the 5v reg gave out the magic smoke. Weight (with props) is 367g, AUW is 634g (Session 5 + 1500mah 4s pack, will probably be 15-25g heavier with a case & strap for the GoPro). 5" behaves quite differently from the smaller quads that I have experience with (carries more momentum) which can be more fun for freestyle flight.

I got sent the wrong camera (wanted a mini, got a micro), but this works well enough for now and I don't see an immediate need to replace it. I'm used to micros so I typically remove connectors and do direct soldering but it seemed like I could get away with using connectors here, for now.

The FC and VTX are coated in silicone conformal coating, and there's hot glue in some places just for my peace of mind (strain and vibration relief).