Mongoose light

By Crispo on Apr 18, 2018

18  981  8

Went for light, could be lighter.


Part List


Mongoose (9 builds)

Flight Controller

OMNIBUS F4 Nano v5 with LC filter (3 builds)


Ori32 4in1 ESC 4x25A 2020 (33 builds)


4 x BrotherHobby Avenger 1507 2800KV 3600KV 4100KV 3-4S Brushless Motor for RC FPV Racing Drone (9 builds)


DALProp CYCLONE Series 5050C Bi-Blade (15 builds)

FPV Camera

Caddx Micro Turbo S1 2.1/2.3mm 600TVL 4:3 1/3 CCD NTSC/PAL IR Block Low Latency FPV Camera (20 builds)

FPV Transmitter

TBS Unify Pro Nano 5G8 (49 builds)


TBS CROSSFIRE micro receiver V2 (237 builds)
Show stores (5)


Sign in to comment

daichfpv   May 06, 2018  

how does it fly? what kv motors did you get?

Crispo   May 06, 2018 

Check what I wrote to Burning North down below. Since I fly 5 inch, I got the 2800 kv.

boof   Apr 24, 2018  

camera is quite vulnerable out there but i also have a mongoose with micro sparrow set with front verticals pointing backwards however i get alot of motor and props in my fpv image. does setting it out front eliminate most of that issue?

Crispo   Apr 27, 2018 

Not that much really, if at all. I ended up flipping it back again.

Burning North   Apr 18, 2018  

Nice! I'm about to put the same motors on a Mode 2 Ghost; would love to hear how this flies!

Crispo   Apr 21, 2018 

It's really quick, and benefits from lighter packs. It turns very sharp, less drift than I get on my regular freestyle rigs. It's also very floaty, so you need to practice proper throttle control, or else you lose the benefit of the lighter motors.

moxfpv   Apr 19, 2018  

Very interesting motor prop combo. A zip tie and heatshrink will keep your vtx antenna out of the props.

Crispo   Apr 21, 2018 

Yeah, I'll make sure to tie it down properly when everything is dialed in properly! Thanks for the feedback :)

Guides & Reviews

22 1,621  13
8 days ago

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
12 2,319 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more