I built this with a few goals in mind.

• Better than my 3 inch babyhawk r
• Use a stack for simplicity and have more room to grow
• dshot1200 and 32 bit esc
• F4 processsor
• A strong sturdy frame (I crash bad sometimes)
• Red colors

I used the HGLRC F440 40 amp esc stack for simplicity and growth. The motors will never reach get close to peak draw since this stack can be used 6s and with 5 inch motors. Also, got esc telemetry and smart audio working.

I ran into some issues with the F440 stack. The first one fried. Was replaced by racedayquads. I then broke the second one for being stupid and using dampening bolts between the esc and fc. This caused the pins to break. OOPS. We all learn something new everyday right? They just allowed to much flexing and broke the pins.

First, flight was great. Flew amazing. Tried a few different props out. Using a slightly modified version of the 4S Emax Babyhawk R recomended settings. They can be found here http://emax-usa.com/news/new-pids-for-the-babyhawk-race-3-inch-version/

Hovers at about 28% throttle and screams at 75%. Have not done anything full throttle yet. Will post a video of a recording if I make a decent run this weekend. With the 3076 propellors it sounds like the angriest hornets nest imaginable.

Weighs in at 278 grams at the moment. Conservative thrust per motor is 500 grams. So, pretty wicked thrust to weight ratio.