By juceto on May 14, 2018

16  983  3

Transtec FROG Lite 218 REBORN

Had this frame for some time and decided to renew it.
This is the original V1 version frame with two replacement arms V2 (including plastic protection).
RX antennas may have a reduced range, however, they are well protected.
1,5 km in an open field. Awesome.
Asgard FC and TBS VTX are covered with one layer of Silicone Modified Conformal Coating 422b and a Liquid tape.
340 g. without a battery.
*Eachine BAT QX105 LED board

FROGis and FROGis-2 are TWINS.

It flies great!


Part List


TransTEC Frog Lite 218mm Carbon Fiber 4mm Arm X Frame DIY Frame Kit RC Drone FPV Racing Multi Rotor (37 builds)

Flight Controller

Asgard AIO (4 builds)


4 x Emax RS2205S 2300KV 2600KV Racing Edition Brushless Motor for FPV Racing (153 builds)


DALProp CYCLONE Series T5045C High-end Propellers (7 builds)

FPV Camera

FOXEER Arrow V3 2.5mm 600TVL 4:3 HAD II CCD PAL/NTSC IR Block Mini FPV Camera Built-in OSD MIC (132 builds)

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) (450 builds)


Lumenier AXII 5.8GHz Antenna (RHCP) (2pcs) (149 builds)


FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM (532 builds)


Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60 (112 builds)

Misc Parts

TBS UNIFY HV / FrSky RX Mounting Board (2 builds)

Misc Parts

10CM SMA Pigtail W/UFL Connector (15 builds)

Misc Parts

ImpulseRC Antenna Tube (2 pack) (2 builds)

Misc Parts

250 Premium Heavy Duty Zip Ties | Black Nylon Cable Ties | XGS Wire Ties by APTronix (8 Inch, Black) (4 builds)

Misc Parts

8mm Braided PET Expandable Sleeving Cable Wire Sheathing New High Quality (6 builds)

Misc Parts

XT60 Male Plug 12AWG 10cm With Wire (20 builds)
See Site
Show stores (10)


Sign in to comment

MrMushroom37   Jun 17, 2018  

I have the frog as well, and I'm wondering where you got the led on the back. There doesn't seem to be a link in the parts list.

VitalkaTDI   May 16, 2018  

that's a build! ;D

Guides & Reviews

22 1,620  13
8 days ago

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
12 2,319 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more