My recent Hyperlow Vert Freestyle build.

The build itself was pretty tight but still straightforward. I really wanted to do the thing in the 10mm height setting and even then encountered brief trouble properly softmounting the Asgard, as the rubber standoffs I would normally use did not fit properly. I overcame my hesitation of widening the mounting holes of the AiO with a drill and put some raceflight gummies in. Sits tight on the screws, so no need to tighten it down. At first I was planning on placing the board witht he power connector solder pads facing out sideways, but could not fit my VTX in with that configuration, so I ended up turning it sideways. Got the XM+ tucked in behind the fpv cam now and the Tramp sitting flush sideways in the back.

Turned out decently clean after all and was a really fun build.

As for the first flights I was pretty confident in this being relatively noise free so I ended up having all notches disabled on the maiden with the dynamic filter on. And it was smooth on the very first flight. Later realized I had forgotten to include a capacitor, but worked out fine so far. The only thing it might still need now is a proper GoPro mount as I am not entirely happy with the velcro solution.

The attached video here is at sth like the 8th battery with not much done tuning wise. I did not expect this to feel that much different from my previous quads with the same FC and motor configuration, but it did. This being my first stretch X definitely makes it require some getting used to as it responds in an entirely different way than what I am used to not only due to the shape but also or mainly the perfect center of gravity.

To sum it up I just freakin love the thing.