Propped Angel

By Sasquads on May 25, 2018

17  145  0

Before I start, first a big thanks for Ashade (check him out here on RB) for designing this beauty and making it available for me and let's not forget the designer of the Vosair frame. Without them this was never possible.
I saw Ashade's build and immediately fell in love with it, I just had to have it.
It's the tightest build I made so far, the 3D printed camera mount I planned on using was to big, there was no place for the receiver, so I had to use a smaller one.
It only fits a 16x16mm flight controller and runs on 2s.
I gave it a touch of purple and it looks.....

Photos

Discussion

Sign in to comment

Guides & Reviews

39 4,016  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,816  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more