My first build
Frame |
NewBeeDrone Cockroach Brushed Super-Durable Frame 65mm
(37 builds)
Newbeedrone.com
|
$3.79 |
Flight Controller |
AlienWhoop V2 F4 Brushed Flight Controller
(2 builds)
Shop.alienwhoop.us
|
$50.00 |
Motors |
TBS Micro Brushed Motors (0617 / 21000kv)
(3 builds)
Team-blacksheep.com
|
$14.99 |
Propellers |
TBS-Tiny Whoop Props 31mm .75mm Hole
(14 builds)
Tinywhoop.com
|
$4.50 |
FPV Camera |
TBS Tiny Camera
(5 builds)
Team-blacksheep.com
|
$17.95 |
FPV Transmitter |
TBS Unify Pro Nano 5G8
(97 builds)
Team-blacksheep.com
|
$19.95 |
Antenna |
TBS Cloverleaf Antenna
(2 builds)
Team-blacksheep.com
|
$7.95 |
Receiver |
FrSky R-XSR 2.4GHz Micro ReceiverDefault Title
(937 builds)
Racedayquads.com
|
$21.99 |
Very Nice!! especially for a first Build. this is the Whoop I had in mind to build, So I'm very interested in how she flies & for how long. have you had a chance to put a few batts through her? if
Thank you for your comment.
Also antenna is too heavy, she can flies for about 3min in HV batts 250 or 260mah, but not smooth.
So I changed this antenna.
http://www.team-blacksheep.com/shop/cat:fpv_antenna_5g8#product_listing
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Awesome Build!! It's almost identical to what im building now as far as components. Quick question, i know you have it all buttoned up by this time but any chance you could upload a pic of the top of your board? showing how you routed the wires?