Something different and powerful for indoor and maybe park flying.
Photos
Part List
Frame |
Colored Cockroach Super-Durable Frame
(2 builds)
Dronejunkie.co.uk
|
$7.00 |
Flight Controller |
AlienWhoop F4 Brushed Flight Controller V2
Dronejunkie.co.uk
|
$50.00 |
Motors |
BDR Unicorn Edition Motors - 6mm Brushed Motors
(3 builds)
Dronejunkie.co.uk
|
$20.00 |
Propellers |
NBD Candy Props - ABS Version
(2 builds)
Dronejunkie.co.uk
|
$5.00 |
FPV Camera |
FX805OSD with FREE 10 Deg. Camera Mount
(2 builds)
Dronejunkie.co.uk
|
$40.00 |
Receiver |
Lemon Rx DSMP (DSMX Compatible) Diversity Satellite
(13 builds)
Lemon-rx.com
|
See Site |
Batteries |
8 x Mylipo 255mAh 4.35V HV 25C / 50C mcpX (PW)
(5 builds)
Dronejunkie.co.uk
|
$48.00 |
HD Camera |
RunCam 3 64G HD 1080p/60fps NTSC/PAL 155 Degree Wide Angle WiFi FPV Camera
(26 builds)
Banggood.com
|
$99.99 |
HD Camera |
GoPro Hero5 Session, 1080p
(302 builds)
Amazon.com
|
$230.41 |
Hey- great looking build! I want to do the mullet mod to my FX805-OSD but can't seem to find a pinout or clear picture of the wiring anywhere online. Any chance you could add a picture that shows how the cam is wired to the VTx (or just describe which pins need to be replaced with wires and which ones are just structural)? Many thanks!
It was soldered this way when I got it. Unfortunetly it smoked a few days ago and I don't have that camera on the kwad anymore to take a picture for you.
No worries! Sorry to hear you smoked yours... I contacted the guys at TinyWhoop HQ and asked them which connections they use when they mod the cameras - they say to use the three pins on the left (as you look at the front of the camera), as the two on the right are redundant/structural/unnecessary. Thanks for the reply, anyway. Happy flying!