5" Cock

By Kuz on Jul 08, 2018

1  223  0

Armattan Rooster build. 4S only due to high kv motors, but can accept 5S. Tough basher. Flies great.

Photos

Part List

Frame

ARMATTAN ROOSTER - 5 inch - FRAME (133 builds)
Boomfpv.com
$95.00

Flight Controller

Holybro Kakute F7 Flight Controller - FC, OSD, Baro
Rotorvillage.ca
$58.99

ESCs

DYS ARIA F45A 45A Blheli_32 4 in 1 3-5S Dshot1200 Ready 5V/3A 9V/1.5A FPV Racing Brushless ESC
Banggood.com
$57.36

Motors

4 x F40 PRO II T-Motor- 2600KV - Racing Motor (9 builds)
Racedayquads.com
$107.60

Propellers

HQ Durable Prop 5X4.3X3V1S (2CW+2CCW) (375 builds)
Rotorvillage.ca
$3.99

FPV Camera

RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone (301 builds)
Banggood.com
$46.11

FPV Transmitter

ImmersionRC Tramp 2-6S HV (US Version) 25-600mW VTX - U.FL (43 builds)
Racedayquads.com
$29.99

Antenna

ImmersionRC FPV Antenna (2 builds)
Amazon.com
$20.44

Receiver

FrSky R9 Mini 900MHz Long Range Receiver
Rotorvillage.ca
$26.79

Batteries

CNHL 14.8V 4S 1300mAh 100C G+ Plus LiPo Battery - XT60 (138 builds)
Racedayquads.com
$17.99

Radio

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (42 builds)
Getfpv.com
$244.99

Goggles

Fat Shark Attitude V4 FPV Goggles Anniversary Edition (11 builds)
Getfpv.com
$349.99

HD Camera

GoPro Hero5 Session (196 builds)
Amazon.com
$299.99

Hardware

2 x Panasonic 1000uF 35V Low ESR Capacitor for ESC Noise Reduction (108 builds)
Racedayquads.com
$2.98

Misc Parts

2 x Rotor Village Medium Lipo Strap w/ Metal Loop (3 builds)
Rotorvillage.ca
$3.98

Video Receiver

Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX FPV Receiver for FatShark Goggles (29 builds)
Banggood.com
$29.23

Radio Module

FrSky R9M Transmitter Module (69 builds)
Racedayquads.com
$34.99

Battery Charger

SkyRC D100 AC/DC Dual Balance Charger Discharger For RC Models
Banggood.com
$99.99

Battery Charger

Ultra Power - UP610 Touch DC Charger - 200W/10A
Rotorvillage.ca
$52.99

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (160 builds)
Banggood.com
$53.99
Show stores (6)

Discussion

Sign in to comment

Guides & Reviews

39 3,737  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,609  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more