Gauntlet I

By Valkyrie71 on Jul 12, 2018

0  21  0

First FPV project build with my son.

Part List


usmile 220mm X Carbon Fiber Quadcopter Frame features Angled Gopro mount Replaceable 4mm arms similar with QAV-X 210 QAV-R 250 X

Flight Controller

KISS CompactCTRL CC All-in-One Flight Controller & ESC (40 builds)
See Site


DLFPV 4pcs DL2306 2700KV 2-4S Brushless Motor for X210 X220 250 FPV Racing Drone Quadcopter 2CW 2CCW in Red


DALPROP 16pcs Cyclone T5046C 5046 3 Blades (5.0 x 4.6) CW CCW Propeller for FPV Racing Quadcopter Frame Kit (4sets, mix color) (3 builds)

FPV Camera

RunCam Swift Mini 2 FPV Camera 2.3mm Lens FOV 150 600TVL One Touch Scene Setting CCD DC 5-36V NTSC OSD Voltage Monitoring

FPV Transmitter

AKK X2P 5.8Ghz 0.01mW/25mW/200mW/500mW/800mW Switchable FPV Transmitter with Pigtail Compatible with Betaflight OSD FC (13 builds)


nidici FOXEER Lollipop FPV Antenna 5.8G 2.3dBi RHCP Super Mini Antenna RP-SMA Male for FPV Drone Quadcopeter Multicopter TX/RX (


FrSky X4RSB 3/16CH Telemetry Receiver with Futaba SBUS 16 Channels Smart Port (32 builds)


FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S (13 builds)


2 x (28 builds)
See Site

Power Distribution

HobbyKing Matek PDB-XT60 w/BEC (5V and 12V) (2 builds)


FrSky 2.4G Accst Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include (205 builds)

Misc Parts

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby

Misc Parts

RioRand RC Model Hop-ups C23212 LiPo Voltage Checker + Warning Buzzer

Misc Parts

Fat Shark FSV1063 Dominator V3

Misc Parts

Fat Shark FSV2442 32ch 5G8 Race Band Receiver Module
Show stores (1)


Sign in to comment

Guides & Reviews

28 2,378  33
27 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,938  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more