Rebel ruXus

By animatedlim_fpv on Oct 07, 2016

5  321  0

My little Rebel. AUW 382 g w/o lipo and GoPro Session.


Part List


Rebel ruXus Gen. 2 (13 builds)

Flight Controller

KISS FC - 32bit Flight Controller (4 builds)


4 x KISS ESC 24A Race Edition


4 x 2206.5 2360kv Pro Series (2 builds)


RaceKraft 5 Inch Tri-Blade Propeller - Transparent 5040 (5x4x3)

FPV Camera

Mini 600tvl Sony Super HAD CCD FPV Camera

FPV Transmitter

TBS Unify Pro HV 5.8 GHz Video Transmitter (584 builds)


TBS Triumph 5.8 GHz Antenna - RPSMA


FrSky X4R-SB Receiver (19 builds)


True Spec 1300mAh 14.8V 37A

Misc Parts

Session 4 & 5 Mount (14 builds)
Show stores (6)


Sign in to comment

Guides & Reviews

39 4,073  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,856  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more