I started with an E-Sky Honey Bee (2008), WLtoys V959, WLtoys V303 (added telemetry and gimball) and a Parrot Bebop 2 FPV. And now my very first "self build quadcopter".
Main configuration:
- 5" GEPRC LX5 Frame (alternative)
- BetaFlight F4 controller
- 4-in-1 35A ESC
- 2600KV Motors
- 3D printed cameramounts
- 3D printed rooftop
Before I started I added all components to PhotoShop and started to figure out how to wire everything. In this picture the wire from the Flit10 schould be conected to the TX from UART1 :-)
Within BetaFlight I configured the drone to fly on ACRO mode by default. Just before the very first flight:
Very happy with this setup! Got the WLtoys V959 feeling back. No flight assist but this one is fast and agile.
Photos
Part List
Show stores (3)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how did you wire the reciver? did you get some ppm connectors?
I connected the Flit10 to the TX from UART1. Within Betaflight I configured UART 1 to be iBus.