Full custom AlienWhoop Zer0 Whoop. This contains 25000kv motors installed into a Cockroach frame, AlienWhoop Zer0 board, Frsky XM receiver Eachine TX03 Camera, Dipole antenna, quad blade 31mm propellers and Tiny Whoop camera mount from PhaserFPV.
Total weight (without battery): 19grams
I use the BetaFPV 260mah 1s Batteries and get around 3min 30sec flight time and the batteries will be at 3.7volts after cool down.
Frame |
COCKROACH Super-Durable frame - NOW IN COLORS!
(18 builds)
Tinywhoop.com
|
$3.99 |
Flight Controller |
AlienWhoop ZER0 Brushed Flight Controller
(5 builds)
Shop.alienwhoop.us
|
$14.00 |
Motors |
Ludicrous Motors - 6x17mm 25000kv - Tiny Whoop
(4 builds)
Tinywhoop.com
|
$18.00 |
Propellers |
31mm 4-blade Micro Whoop Propellers (1.0mm Shaft)
(7 builds)
Betafpv.com
|
$0.79 |
FPV Camera |
Eachine TX03 NTSC Super Mini 0/25mW/50mW/200mW Switchable AIO 5.8G 72CH VTX 600TVL 1/3 Cmos FPV Camera
(36 builds)
Banggood.com
|
$19.99 |
Antenna |
RDQ 5.8GHz U.FL Dipole FPV Antenna - Linear
(85 builds)
Racedayquads.com
|
$2.99 |
Receiver |
FrSky Ultralight XM Receiver Up To 16CH for RC Drone FPV Racing
(71 builds)
Banggood.com
|
$11.99 |
Batteries |
260mAh 1S Lipo HV Battery (8PCS)
(18 builds)
Betafpv.com
|
$19.99 |
Radio |
FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2)
(52 builds)
Getfpv.com
|
$244.99 |
HD Camera |
GoPro Session
(62 builds)
Getfpv.com
|
$149.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
daaaaaaammmmnn that camera mount is cool, can I have the STL file for print?
hey! thats my cam mount! always like seeing them in the wild https://www.thingiverse.com/thing:2746635
That's an awesome looking mount! Definately going this route for my next micro!