Tigerblood Winning

By FissionBomb on Sep 18, 2018

11  213  0

Picked the Win2XL as a platform. It can take 2inch - 3 inch props.

I went with 1105 6000kv motors to try and get a little more flight time than the 1105 7500kv I'm running on my Flex SlimX.

I have a Custom 3D printed pod on the way to replace the top plate and camera mounts.

The Camera is going to be reviewed on Amazon and FXT is anxiously awaiting review. I will link here when it's complete.

09/18/18 - I built up this micro without many issues. I used Betaflight 3.5 for the first time after realizing the target is NOX rather than Betaflight. There are only 2 available UARTs on this FC so be aware. I also had to make specific adjustments to the camera settings for the image appear to my liking. My first couple flights were at sundown and the light transitions aren't so great. Brighter conditions were better. I have a little bit of descending propwash to tune out but this build is fast and smooth on 3S. I highly recommend the pod as a custom addition.

Photos

Discussion

Sign in to comment

Guides & Reviews

28 2,451  33
28 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,957  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more