This has become my new favorite freestyle quad. Its a little heavy but it handle very well.
TPU parts are my own design and printed by myself.
Frame |
HYPERLOW CG
(3 builds)
Kwadgarage.net
|
$75.00 |
Flight Controller |
FOXEER F405 AIO BetaFlight Flight Controller
(11 builds)
Kwadgarage.net
|
$37.99 |
ESCs |
4 x SPEDIX ES 30A (HV) Speed Controller 3S-6S
Kwadgarage.net
|
$47.96 |
Motors |
4 x 2206.5 2600kv Pro Series
(6 builds)
Rebelminiquads.com
|
$99.96 |
Propellers |
HQ PROPS 5 X 4.5 X3 V1S
Kwadgarage.net
|
$2.00 |
FPV Camera |
Foxeer Arrow Micro Pro 600TVL FPV Camera with OSD (2.1 lens)
(2 builds)
Kwadgarage.net
|
$10.00 |
FPV Transmitter |
MATEK VTX-HV 5.8G 40CH w/ BFCMS (TRAMP protocol)
Kwadgarage.net
|
$29.99 |
Antenna |
FOXEER Lollipop 5.8G RHCP Antenna(2pcs) SMA CONNECTOR
(5 builds)
Kwadgarage.net
|
$19.99 |
Receiver |
FRSKY R-XSR SBUS RECEIVER WITH TELEMETRY
Kwadgarage.net
|
$19.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how do you have your reciever configured in Betaflight? what uart
I am useing the RX1 for Sbus and the TX4 for smartport. I am now running CRSF in the same fashion. I just conected it as Foxeer shows in the Pinout for the board. Super simple and worked the first try.
i am running sbus to the RC port as my diagram shows, and I can't get it to comunicate with the F
Your right the RX1 is labelds RC on the board. Make sure in your ports tab on Betaflight you have the uart 1 serial RX turned on See picture. This was taken back when I first set this kwad up.
thank you very much, i was about to switch the pad to rx4 and see what happens
No problem. I hope that helps you out. If not let me know.
i think its a step in the right direction, but im still not having any luck getting the reciever to communicate with the fc
Just sent you a message so we can chat in private.