Hello everyone,
i will present here my work steps for my first long rane build.
For starters the frame: I've got myself the DiveX frame from fpvframe.ch. They have various extra parts, which you can print at home or get direct from them for a small additional charge. So i got myself the horizontal Crossfire Imortal - T holder. All the 3D printable files are on thingiverse.com.

Here i used the new Hobbywing XRotor Micro OMNIBUS F4 G2 Flight Controller + 45A 4 In 1 Blheli_32 3-6S Brushless ESC bundle. But firstly i mounted my F60 Pro 1750kv T-Motors. I coated the wires with a membrane tube (blue) and then soldered them to the ESC. The ESC is soft mounted.
After i finished to solder all the motors, i soft mounted the FC, then the RunCam Split PDB.To finish it up, i mounted my 2G4 VTX under the top plate and soldered its wires to the FC. Then i mountet my mini GPS module and soldered the RX and TX pins to my FC (UART2).
For your information, the Hobbysing XRotor Micro OMNIBUS F4 G2 got three UART ports.

All the photos to my build are here in the gallery
Cheers ! and happy flying !_!