I built this because I wanted something that performed better than my old brushed micro quad, but I also wanted it to be lighter. I made up some 3d printed adaptors for the motors, and the 16mm x 16mm flight stack. The end result was a quad that is significantly lighter and more powerful, at 53.3g including the 2s lipo!
Photos
Part List
Frame |
LANTIAN 105 105mm Carbon Fiber DIY Micro FPV RC Quadcopter Frame Support 8520 Coreless Motor
Banggood.com
|
$6.99 |
Flight Controller |
Super_S Flytower Omnibus F3 Flight Controller Built In Betaflight OSD Dshot 6A 4 In 1 ESC BLHeli_S
(14 builds)
Banggood.com
|
$33.38 |
Motors |
BR1102 8000KV Micro Brushless Motor 4pcs / set - $26.80 | GearBest.com Mobile
M.gearbest.com
|
$26.80 |
Propellers |
10 Pairs Kingkong 65mm Blade Propeller Prop 20Pcs for 720 8520 Coreless Motor DIY Micro Quadcopter
(30 builds)
Banggood.com
|
$4.99 |
FPV Camera |
Eachine TX02 NTSC Super Mini AIO 5.8G 40CH 200mW VTX 600TVL 1/4 Cmos FPV Camera
(12 builds)
Banggood.com
|
$18.34 |
Batteries |
2 x 5PCS GAONENG 3.7V 250mAh 1S 30C/60C PH1.25 Plug Lipo Battery for Blade Nano QX CPX and Tiny Whoop
(3 builds)
Banggood.com
|
$33.98 |
i have this frame for brushed quad as well, not so long ago, 3 months or so. i've used it to learn fpv. i've had great time with it. nothing like first time flying fpv :). i'm still using it to practice flying line of sight, because i still have many spare parts left. did you try it with 2s batteries ? it's really fast. anyway, i'm going to convert one of this frame to brushless build too. because i can't find frame that uses kk 65mm props and 08xx motors for 1s build.
anyway, onto brushless now.
your build should fit this frame nicely.
Lil' Duece
https://lilduece.com/
did you happen to still have the 3d printer flies for the brushless adapters? have one of these frames lying around, figuring out what board to mount with my old flysky transmitter.