Seeker

By TheMrJahn on Nov 21, 2018

20  528  0

Was looking for something new... Liked Armattan Mongoose frame, decided to make it little bit lower. Replaced standoffs with smaller size - m3x15mm. Had to ordered some custom 3d printed parts for this build to mount antenna, xt60 and micro cam.

Photos

Part List

Frame

Armattan Mongoose 5" FPV Frame
Store.rotorriot.com
$27.99

Frame

4 x iflight M3*15mm Round Head Aluminum Alloy Multicolor Standoff for RC FPV Racing Drone
Banggood.com
See Site

Flight Controller

Betaflight F7 Flight Controller (4 builds)
Pirofliprc.com
$59.99

ESCs

4 x Hobbywing XRotor Micro 30A BLheli_32 32bit ARM 2-5S Brushless ESC DShot1200 Ready for RC FPV Racing Drone (5 builds)
Banggood.com
$68.60

Motors

4 x T-motor F60 Pro II 2207 2350KV 2500KV 2700KV 3-4S Brushless Motor for RC Multirotor FPV Racing Drone (6 builds)
Banggood.com
$102.60

Propellers

2 x DAL T5040 V2 Tri-Blade (2 builds)
Dalprops.com
$4.98

FPV Camera

RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone (297 builds)
Banggood.com
$46.11

FPV Transmitter

TBS UNIFY PRO 5G8 V3 (SMA) (15 builds)
Pirofliprc.com
$39.95

Antenna

Lumenier AXII 5.8GHz Antenna (RHCP)
Pirofliprc.com
$34.99

Receiver

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone (823 builds)
Banggood.com
$24.59

Misc Parts

10Pairs/20pcs XT60 Plug Male Female Bullet Connectors For RC Drone Multirotor FPV Racing Battery (5 builds)
Banggood.com
$6.55

Misc Parts

Alarm Module w/ LED For NAZE32 F3 Flight Controller RC Drone FPV Racing Multi Rotor (10 builds)
Banggood.com
$2.58

Misc Parts

1PC Realacc 45 Degree Antenna Adapter Connector SMA RP-SMA For RX5808 Fatshark Goggles RC Drone (10 builds)
Banggood.com
$1.89

Misc Parts

PANASONIC 1000UF 35V LOW ESR CAPACITOR (15 builds)
Pirofliprc.com
$1.05

Misc Parts

4 PCS 4-6S Mini LED Light Board Red Green for RC Drone FPV Racing Frame Kit (4 builds)
Banggood.com
See Site
Show stores (4)

Discussion

Sign in to comment

Guides & Reviews

27 2,075  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more