5" HyperLite Floss 2.1

By cjdavies on Oct 07, 2018

8  588  2

First time building a 5" quad specifically not to carry a GoPro & just for the personal enjoyment of flippy floppies :)

273g dry

Photos

Part List

Frame

HyperLite Floss "V2.1" Race Frame 5mm Arms 5" (28 builds)
Pirofliprc.com
$44.99

Flight Controller

Racerstar TattooF4S 30A BLHELI_32 4in1 ESC 5V BEC w/ F4 Flight Controller AIO OSD Current Sensor (15 builds)
Banggood.com
$69.99

Motors

4 x HyperLite Team Edition 2205-2522 Ti Shaft (6 builds)
Pirofliprc.com
$59.96

FPV Camera

Foxeer Arrow Micro Pro 1/3" CCD 2.1mm 4:3 600TVL PAL/NTSC FPV Camera with OSD Black/Blue/Red (228 builds)
Banggood.com
$20.70

FPV Transmitter

AKK FX2-ultimate-mini FPV VTX(International Version) (14 builds)
Akktek.com
$24.99

Antenna

Lumenier AXII MMCX 5.8GHz Antenna (RHCP) (70 builds)
Getfpv.com
$14.99

Receiver

FrSky R9 Mini 900MHz Long Range Receiver (52 builds)
Getfpv.com
$19.99

Radio

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (54 builds)
Getfpv.com
$244.99

Radio

FrSky Taranis X-Lite Pro ACCESS 2.4GHz Radio Controller (Deep Sea Blue) (14 builds)
Getfpv.com
$199.99

Goggles

Eachine EV800DM Varifocal 5.8G 40CH Diversity FPV Goggles with HD DVR 3 Inch 900*600 Video Headset Build in 2000mAh Battery (2 builds)
Banggood.com
$79.90

Goggles

FatShark Attitude V2 FPV Headset System w/Trinity Head Tracker and CMOS Camera
Hobbyking.com
See Site

HD Camera

GoPro HERO4 Session Video Camera GPCHDHS-102 (41 builds)
Phaserfpv.com.au
$147.97

Video Receiver

Aomway DIV006 V4 DVR 5.8G 64CH Raceband FPV Receiver Built-in DVR w/ Auto Save Function
Banggood.com
See Site

Radio Module

Frsky R9M Lite Pro 900MHz Transmitter Module Up to 1W RF Power Compatible FrSky ACCESS Protocol for Taranis X-Lite Pro S and X9 (10 builds)
Banggood.com
$65.99

Radio Module

FrSky R9M 900MHz Long Range Transmitter Module for FrSky R9 Series (68 builds)
Banggood.com
$61.80

Soldering Iron

Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow) (26 builds)
Amazon.com
$119.99
Show stores (7)

Discussion

Sign in to comment

Jodie Froster   Oct 07, 2018  
1

Very clean

cjdavies   Oct 08, 2018 

It gets a little bit better with each build, just gotta keep going :)

Guides & Reviews

22 1,077  11
14 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,739  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more