RXUF 0203

By q-ratz on Dec 11, 2018

12  357  5

RXUF 0203 reporting for duty. My version of the limited RotorX UltraFox Frame features, as of now, the Amaxinno 2308 1500kv motors on 5S lipos and the absolutely brilliant Radix from BrainFPV. Seriously: Try that Flight Controller! In order to fit the Hobbywing ESC i had to grind out a tiny bit of the titan top plate. The new version of the Atomic Fox / Ultra Fox canopy can be screwed to the body instead of zip tying it. This thing just looks gourgous and flies amazingly well. A job well done by Ryan, Andrew and Benson.

Photos

Part List

Frame

RotorX Atomic Fox 5" (12 builds)
Airbladeuav.com
$74.99

Flight Controller

BrainFPV RADIX Flight Controller (Custom Graphical OSD, Baro, Stackable) (111 builds)
Getfpv.com
$55.99

ESCs

XRotor Micro 40A 4in1 BLHeli-S DShot600 for FPV Pilots - HOBBYWING North America (143 builds)
Hobbywingdirect.com
$59.99

Motors

4 x Motor 2308-1500KV (2-6S) AMAXinno
Eu.amaxshop.com
See Site

Propellers

HQ Long Range 7x3.5x3 V1S PC Prop (18 builds)
Pirofliprc.com
$3.99

Propellers

Azure Power 6145 BSP - Big Smooth Props (Set of 4 - Greenery) (13 builds)
Getfpv.com
$3.49

FPV Camera

RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone (303 builds)
Banggood.com
$46.11

FPV Transmitter

Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX LED Display Support OSD/Pitmode/Smart Audio (21 builds)
Banggood.com
$16.99

Antenna

AXII-SMA (LONG) flexible - TrueRC Canada (35 builds)
Truerc.ca
$11.99

Receiver

TBS Crossfire Nano RX - FPV Long Range Drone Receiver (704 builds)
Team-blacksheep.com
$24.95

Batteries

Turnigy Graphene 2200mAh 5S1P 45C Lipo Battery (8 builds)
Hobbyking.com
$20.99

Radio

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (54 builds)
Getfpv.com
$244.99

Goggles

Fat Shark Dominator HD2 Terminator Edition FPV Goggles (4 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO5 Session (267 builds)
Getfpv.com
$199.99

HD Camera

Foxeer 4K Box Action Camera SuperVision (10 builds)
Foxeer.com
$169.99

Misc Parts

Ublox SAM-M8Q GPS module
Drotek.com
$29.52

Misc Parts

FuriousFPV 72mm Pigtail MMCX to SMA cableSKU: FPV-0379-S
Furiousfpv.com
$2.95

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (145 builds)
Getfpv.com
$149.99

Radio Module

TBS Crossfire Micro TX V2 (115 builds)
Team-blacksheep.com
$69.95

Battery Charger

iSDT SC-620 500W 20A MINI Smart LCD Battery Balance Charger (3 builds)
Getfpv.com
$63.74

Soldering Iron

TS100 Ltkolben KIT + TS-I inkl. XT60 Kabel (171 builds)
Flyingmachines.de
$76.40
Show stores (13)

Discussion

Sign in to comment

JC250   Jan 03, 2019  

how is the vtx?

q-ratz   Jan 04, 2019 

So far it works very well. I have attached a heatsink and so far temperatures outside have been somewhere neat 0C, so i can't tell you yet how it will work under heat.

RZFPV   Dec 11, 2018  

flight time?

q-ratz   Dec 13, 2018 

just had the maiden at terrible conditions. 0 degree temperature and brutal icy wind. I drained 1950mah of that 2200mah 5S pack in 7:30min. I could gone at least 9min, but I started freestyling towards the end of the lipo.

q-ratz   Dec 13, 2018 

just had the maiden at terrible conditions. 0 degree temperature and brutal icy wind. I drained 1950mah of that 2200mah 5S pack in 7:30min. I could gone at least 9min, but I started freestyling towards the end of the lipo.

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,945  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more