RealAcc Ultra 215

By ledimestari on Oct 24, 2018

4  209  2

Ultra 215

daily beater

RealAcc Ultra 215 with Caddx Turtle. Originally bought this frame to replace my old ZMR 250. After that it has slowly gotten parts replaced one by one. Oldest parts of this now are 20A Blheli ESCs.

Cheap as chips Racerstar Sprog X motors also work a lot better than expected.

It flies stupidly good compared to other quads which have way more expensive parts carefully thought out setups.

Antenna is self made pagoda so that's why it is not listed

Flight video:


Part List


Realacc Ultra-215 215mm Wheelbase 4mm Arm Carbon Fiber FPV Racing Frame Kit w/ 5V&12V PDB Board

Flight Controller

Matek F405-CTR 30x30 Flight Controller (34 builds)


4 x Favourite FVT LittleBee 20A OPTO PRO ESC BLHeli 2-4S F396 Supports OneShot125 for RC Drone FPV Racing (20 builds)


5 PCS Racerstar SPROG X 2205 2300KV 3-4S Brushless Motor for Sprog Beginner RC Drone FPV Racing (3 builds)


2 Pair DALPROP T5045C Cyclone 5 Inch 3 Blade Propeller Clover Prop Black Red Orange Green (216 builds)

FPV Camera

Caddx Turtle 1080p 60fps Mini HD FPV Camera w/ DVR - Red (54 builds)

FPV Transmitter

DYS MI200MW 25/200mW Switchable 5.8G 40CH FPV Transmitter (10 builds)


Cooltech RFASB PPM SBUS 2.4G FASST Compatible Receiver for Futaba T10CG 14SG T12Z T12FG TM-14 (6 builds)


Turnigy nano-tech 1300mAh 4S 45~90C Lipo Pack


Flysky FS-NV14 2.4G 14CH Nirvana Transmitter with iA8X Receiver 3.5 Inch Display Open Source (4 builds)


Fatshark Dominator V2 FPV Goggles Video Glasses 600x480 VGA (2 builds)

HD Camera


HD Camera

GoPro HERO7 Black Action Camera (102 builds)

Misc Parts

Panasonic 35V 470uF LOW ESR Capacitor (14 builds)

Misc Parts


Video Receiver

Realacc RX5808-PRO-PLUS-OSD 5.8G 48CH FPV Receiver Achilles Open Source W/Cover For Fatshark Goggles

Radio Module

Team BlackSheep TBS Crossfire TX LITE (4 builds)

Battery Charger

ISDT SC-608 150W 8A MINI Smart LCD Battery Balance Charger AU Warehouse (14 builds)

Battery Charger

ISDT D2 200W 24A AC Dual Channel Output Smart Battery Balance Charger (18 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (265 builds)


Lowepro QuadGuard BP X3 - Drone Backpack for 4 FPV Quad Racing Drones and 15" Laptop w/Exterior Mounts (Black)
Show stores (8)


Sign in to comment

bonethruster FPV   Nov 02, 2018  

i like this....a suggestion perhaps some nice clear heatshrink over the arms instead of the tape? i think it would really look slick with heatshrink....nice work tho

Jodie Froster   Oct 25, 2018  

I'm a huge fan of this. I have seen so many 3" builds with the fpv/HD recording cams, and I get it that being able to fly smaller gaps is cool, and 5" rigs can carry a goPro (with better image quality). I ALSO get it that hanging an expensive action camera off the forehead of my kwad like a lopsided unicorn is kinda dumb. I intentionally put the sensitive bits INSIDE the frame because I need to be able to crash! I have been toying with this idea, but haven't pulled the trigger yet, thanks for the inspiration!

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more