Diatone Tyrant 150

By The Lightning Stalker on Nov 01, 2016

3  463  2

The Tyrant is a great quad to get started in the hobby.

Photos

Part List

Frame

Diatone Tyrant 150 (PNF)
Diatoneusa.com
$220.00

Flight Controller

Diatone NAZE32(B) Thin 6DF Flight Controller REV6(B) STM32 F103 Supports Baseflight For RC Multiroto
Banggood.com
$15.99

ESCs

Favourite FVT LittleBee 20A OPTO PRO ESC BLHeli 2-4S F396 Supports OneShot125 for RC Drone FPV Racing (20 builds)
Banggood.com
$11.19

Motors

DYS BX1306 1306 4000KV CW/CCW Brushless Motor for Multicopter (22 builds)
Banggood.com
$21.89

Propellers

DYS X30303 3 blade bullnose propeller 3030 CW/CCW Nylon Fiber for RC Drone FPV Racing (9 builds)
Banggood.com
$1.91

FPV Camera

600TVL 1/4 1.8mm CMOS FPV 170 Degree Wide Angle Lens Camera PAL/NTSC 3.7-5V for RC Drone FPV Racing (94 builds)
Banggood.com
$7.37

FPV Transmitter

Diatone SP2 25 & 200mW 48 CH (2 builds)
Fpvgear.dk
$38.01

Antenna

Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair Blue Red w/Canopy For RC Drone (112 builds)
Banggood.com
$11.99

Receiver

Turnigy iA6C PPM/SBUS 8CH 2.4G AFHDS 2A Telemetry Receiver
Hobbyking.com
$10.55

Batteries

Turnigy Graphene 1300mAh 3S 45C LiPo Pack w/ XT60
Hobbyking.com
$19.18

HD Camera

GoPro Hero5 Session (267 builds)
Amazon.com
$299.99

HD Camera

HERO5 Session
Readymaderc.com
$249.99

HD Camera

GoPro HERO5 Session (267 builds)
Getfpv.com
$199.99

Misc Parts

500pcs Milk White Nylon Cable Ties Zip Ties 2.7mmx150mm/200mm (4 builds)
Banggood.com
$5.99

Misc Parts

Loctite Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe (1363118 ) (2 builds)
Amazon.com
$4.84

Misc Parts

H-810R Full Size 10" Acrylic Tough Hot Glue Stick - 8 Pack
Amazon.com
$3.49

Misc Parts

Electrolytic Capacitor, 1000 µF, 25 V, FM Series, ± 20%, Radial Leaded, 12.5 mm (7 builds)
Newark.com
$0.85

Misc Parts

2-pin Picoblade Power Lead - Male Pigtail (3 builds)
Readymaderc.com
$0.69

Misc Parts

TVS Diode, SMBJ Series, Bidirectional, 18 V, 29.2 V, DO-214AA, 2 Pins (2 builds)
Newark.com
$0.45
Show stores (8)

Discussion

Sign in to comment

sp00f FPV   Aug 07, 2017  

How much does that weigh all up? Looks heavy. I just finished my tyrant build and im worried about weight.

The Lightning Stalker   Nov 22, 2017 

360g Too heavy, it flies like a brick.

Guides & Reviews

29 1,579  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
45 5,038  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more