Commissioned 6S Campfire

By acromode on Nov 02, 2018

4  204  2

motors are actually 1750kv

The canopy did need a fair amount of customization, to fit the relatively large FlightOne Bolt32, but it’s all in there and has clearance.

The micro eagle also has the largest lens for a micro cam, so the cam port needed work too, but the video is great.

Finally the carbon where the motors mount needed some work too as it was making contact with the prop shaft on the bottom. But I got that sorted.

Photos

Part List

Frame

CF1-SX - Stretch X Racing Frame by CampFireQuads (3 builds)
Racedayquads.com
$59.99

Flight Controller

FlightOne RevoltOSD (32 builds)
Shop.flightone.com
$44.99

ESCs

FlightOne Bolt32 V2 (15 builds)
Shop.flightone.com
$64.99

Motors

4 x TMotor F40 PRO II - 1600KV (35 builds)
Getfpv.com
$99.60

FPV Camera

RunCam Micro Eagle 800TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera - Red (306 builds)
Racedayquads.com
$44.99

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) (587 builds)
Team-blacksheep.com
$49.95

Antenna

Lumenier AXII U.FL 5.8GHz Antenna (RHCP) (148 builds)
Getfpv.com
$14.99

Receiver

XM PLUS (Mini SBUS Non-telemetry Full Range) (1430 builds)
Pirofliprc.com
$12.99

Batteries

Tattu R-Line Version 3.0 22.2V 6S 1300mAh 120C LiPo Battery - XT60 (12 builds)
Racedayquads.com
$36.99
Show stores (5)

Discussion

Sign in to comment

Nabla   Nov 07, 2018  

What are those propellers?

acromode   Nov 07, 2018 

they are from DemonRC a friend in the industry gave me them to try, iirc they are 5046

Guides & Reviews

59 4,820  49
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,695  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more