Elegante

By chippyfpv on Nov 04, 2018

8  355  1

The GEPRC Elegant frame is excellent quality and the only change I made was routing the battery cable through the aluminum cage behind the camera instead of on the side. Check out the maiden on my youtube channel, keeping in mind that I am new to FPV. 600g with gopro and battery
YouTube Video
Integrated buzzer and LEDs used for battery voltage warning and arm state respectively.
Configuration:
Quad X Props In
DSHOT1200
8kHz Gyro update frequency
8kHz PID loop frequency
Reciever Serial-based reciever (SPEKSAT, SBUS, SUMD) Reciever Mode
Telemetry LED_Strip Airmode and OSD enabled
DShot beacon enabled
SBUS Serial Reciever Provider
---P----I----D---Super-Rate
R|44|40|28|0.72
P|58|50|30|0.72
Y|70|45|----|0.70

Photos

Discussion

Sign in to comment

EZRACER   Nov 07, 2018  
1

Considering the way you build, id say you were a experienced pilot! Your flying is not that bad either, keep ripping man

Guides & Reviews

17 1,480  18
6 days ago

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more