Hyper lite Floss 2.1

By SoCoFPV on Nov 30, 2018

24  627  8

Kwad to the 10th power... not a doctor's diagnosis but building quadcopters is a bit of an illness @ this point. This is the second build(10 total now) I've used Lumenier's Micro LUX V3 F4 Stack.
@30a the 4n1 should keep those 2405/2522kv fed and BLheli32 keeps things smooth as butter. talk about smooth, I'm really loving that Pod. This is my first build with a pod. I haven't got a lot of air time with it other than a test hover and some punchouts to make sure everthing is in step.


Part List


HyperLite Floss "V2.1" Race Frame 5mm Arms 5" (28 builds)

Flight Controller

Full Size Stacks/Combos/AIOs (30x30) (51 builds)


4 x PyroDrone HyperLite 2405-2522 Team Edition (7 builds)


HQ Prop 5x4.8x3 V1S Tri-Blade 5" Prop 4 Pack - Choose Your Color (74 builds)

FPV Camera

Foxeer Products (25 builds)

FPV Transmitter

AKK FX3 VTX (112 builds)


Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (230 builds)


FrSky R-XSR SBUS 2.4GHz Micro ReceiverDefault Title (842 builds)


RDQ Series 14.8V 4S 1300mAh 100C LiPo Battery - XT60 (83 builds)


FrSky Taranis Q X7 2.4GHz 16CH Transmitter (White) (215 builds)


FatShark Dominator V3 RTF Bundle FPV Goggle with OLED Receiver Battery Case for RC Drone (56 builds)

HD Camera

GoPro Hero5 Session Waterproof 4K Video Camera (196 builds)

Misc Parts

Floss 2 & 2.1 TEAM EDITION Canopy with Axii mount (3 builds)

Video Receiver

Furious True-D Diversity Receiver Module 5.8GHz System V3 Firmware 3.9 (22 builds)

Radio Module

TBS Crossfire TX LITE - Long Range R/C Transmitter (26 builds)

Battery Charger

ISDT Q6 Pro BattGo 300W 14A Battery Balance Charger (41 builds)


Torvol Quad Pitstop Backpack PRO (4 builds)
Show stores (8)


Sign in to comment

Theo   Jul 24, 2019  

Hey SoCoFPV,

I am just starting off with this new hobby, so I was thinking of following your setup; since it fits in my budget.
But have a few questions:

  1. What are the uarts for this FC for SmartPort, SmartAudio, and SBus in Betaflight?
  2. Which solder pad in the Lux V3 is for SmartPort in the R-XSR?
  3. Which solder pad in the Lux V3 is for SmartAudio in the VTX?

So sorry for my bad english

SoCoFPV   Jul 27, 2019 

i just went to GetFPV.com and used the user manual.
just make sure SBUS is on Rx pad and SMARTPORT is on TX pad, they have to be on seperate UARTs.

Minichado   Jul 19, 2019  

How did that stack holdup for 5" abuse? I got it on a micro but want to throw it in a larger quad atm

SoCoFPV   Jul 19, 2019 

no issues to date, and i have it in a 4" biuld also.

Minichado   Jul 19, 2019 

Nice. I've got it in a 3" I acquired, about to swap it into something larger. thanks for the info!

M490fpv   Dec 03, 2018  

Nice and clean build!

SoCoFPV   Dec 03, 2018 

Thanks , biulding is half the fun.

Guides & Reviews

39 3,808  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,663  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more