Talon

By ChillerFPV on Nov 12, 2018

2  70  0

another one from me

Photos

Part List

Frame

RD-025 TALON SVX (5 inch props) | kareareadrone (2 builds)
Kareareadrone.com
See Site

Flight Controller

KISS FC V2 - 32bit Flight Controller (56 builds)
Flyduino.net
$55.95

ESCs

DALRC Engine 32Bit 40A 3-5S 30x30 4in1 ESC w/ BEC (50 builds)
Racedayquads.com
$56.49

Motors

EFAW 2407R 2800kv Motor (5 builds)
Getfpv.com
$26.99

Propellers

HQProp DP 5x4.8x3 Durable V1S PC Propeller - Licht Türkis (Triblade) (74 builds)
Fpvracing.ch
$3.90

FPV Camera

RunCam Split 2 inkl. WiFi (81 builds)
Flyingmachines.de
$105.48

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) (587 builds)
Team-blacksheep.com
$49.95

Antenna

Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (232 builds)
Getfpv.com
$14.99

Receiver

TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER (764 builds)
Team-blacksheep.com
$24.95

Batteries

Tattu R-Line Version 2.0 1550mAh 100C 4S1P High Voltage Lipo Battery Pack with XT60 Plug (8 builds)
Genstattu.com
$32.99

Radio

TBS Tango (8 builds)
Team-blacksheep.com
$249.95

HD Camera

GoPro HERO5 Session (271 builds)
Getfpv.com
$199.99

Video Receiver

TBS Fusion (6 builds)
Team-blacksheep.com
$119.95

Radio Module

Flynoceros (8 builds)
Theflynoshop.com
$93.99

Soldering Iron

TS100 Portable Programmable Smart Soldering Iron (179 builds)
Racedayquads.com
$49.99

Backpack

TBS FPV Backpack
Droneshop.nl
$99.00
Show stores (10)

Discussion

Sign in to comment

Guides & Reviews

60 5,259  52
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,792  20
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more