I picked up a NFE Boss 7 frame, 3d printed out of ABS. Installed my old Beecore FC, some BetaFPV 7x16 17,500kv motors, and a Caddx Firefly AIO cam. The cam is mounted using a Caddx Firefly 3d printed mount designed by LunchboxFPV, and tucked under a traditional canopy. Flies great, frame is repairable with acetone, and just plain love it compared to the ducted framed whoops out there, this thing rips!
Frame |
NFE Boss Frame - C Ray Tech's Blog
Craytechblog.com
|
$8.00 |
Flight Controller |
Eachine Beecore F3 EVO Brushed ACRO Flight Control Board (DSM2)
Amainhobbies.com
|
$36.99 |
Motors |
7x16mm 17500KV Brushed Motors - LunchBoxFpv – LunchBox FPV
Lunchboxfpv.com
|
See Site |
Propellers |
USAQ 12pcs 46mm Propeller 716 720 Brushed Motor High Efficiency
Amazon.com
|
$9.65 |
FPV Camera |
FireFly
Caddxshop.com
|
$24.99 |
Batteries |
Crazepony 4pcs 260mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop JST-PH 2.0 Powerwhoop Connector
Amazon.com
|
$14.99 |
Misc Parts |
Graffiti - Canopy for Beta 65mm and 70mm Frames – LunchBox FPV
Lunchboxfpv.com
|
See Site |
Misc Parts |
Caddx Firefly camera mount by LunchboxFPV
Thingiverse.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for ShadetreeJB