This is the brand new Emodia long freestyle frame.
More info of this frame can be found: https://dima.fi/fpv/emodia/

I used shorter 15mm standoffs in this build, so i have to use a 14mm micro cam. Normal length of the standofss in this frame is 24mm.
Twist lock Gopro mount: https://www.thingiverse.com/thing:3170926
I have been waiting to get the new Karearea TOA motors to some of my builds! I have heard so much good feedback about them.
These motors are 2306 2450kv, suitable for 2-6S!

Hydro dipped the frame. It did not come as good as i wanted, but this will be my main freestyle rig, so the surfaces go bad soon anyways :P
Managed to hide almost all wires and did the soldering of FC under side. I made a wiring tube from nylon net tube to run all wires inside the tube. Nice and clean, huh?
I did all screws for this build from M3x30 SS screws, cut to right length and heat treated to bronze/purple(ish) color.
Leds are iflight leds with iflight 4-6S controller.

Sorry, no proper 6" props yet, i have to start with HQ 5,5x4x3.