Nana-go TBS Source One 7"

By irmanhilmi on Nov 24, 2018

15  847  5

Basically a transplant of

TBS Source One V0.2 frame with 7" arms. The arms are really stiff, been having a lot of fun flying this one. The Dalprop 7056 are really quick, and no jello even without ND filters. Running on 5S.

You can check out the 3D parts that I designed and printed for this here


Part List


TBS Source One V0.2 5inch (31 builds)

Flight Controller

Matek F405-CTR 30x30 Flight Controller (30 builds)


4 x Aikon AK32 35A 6S Esc (8 builds)


4 x 3Bhobby 2306 1700KV/2100KV/2500KV/2700KV 3-6S Brushless Motor for RC FPV Racing Drone (6 builds)


2 Pairs 3-blade DALPROP CYCLONE T7056C Props for FPV Racing (9 builds)

FPV Camera

Foxeer Monster Mini Pro V3 1200TVL CMOS 16:9 WDR FPV Camera (1.8 or 2.5mm) - Choose Your Color & Lens (17 builds)

FPV Transmitter

AKK FX2-ultimate(N/A for US customer) (21 builds)


Team BlackSheep TBS Crossfire Immortal T Antenna - Heli-Nation (21 builds)


AXII-SMA (Long) | (33 builds)


TBS Crossfire Nano Rx (Special Edition) (20 builds)


CNHL 18.5V 5S 1300mAh 100C LiPo Battery - XT60 (6 builds)


CA$166.70 FrSky ACCST Taranis Q X7 2.4GHz 16CH Mode 2 Transmitter Blue Orange for RC FPV Racing Drone RC Parts from Toys Hob (133 builds)


Fat Shark Dominator V3 FPV Goggles (30 builds)

HD Camera

GoPro HERO7 Black Action Camera (17 builds)

HD Camera

GoPro HERO5 Session (197 builds)

Misc Parts

ETHIX Battery Straps (4pcs) (4 builds)

Misc Parts

0.7g Super Mini WS2812B RGB5050 4 Bit Colorful LED Strip for Naze32 F3 F4 Flight Controller RC Drone (7 builds)

Misc Parts

Dual BN-220 NEO-M8N GPS GLONASS Antenna Module Ublox M8030 TTL Level RC Drone Airplane (15 builds)

Video Receiver

FuriousFPV True-D V3.8 Diversity Receiver System - Clarity Redefined (7 builds)

Radio Module

TBS Crossfire Micro TX (48 builds)

Battery Charger

ISDT Q6 Plus 300W 14A MINI Pocket Battery Balance Charger (41 builds)

Soldering Iron

Temperature Controlled Soldering Station Analog
See Site


Lowepro QuadGuard BP X1 Black/Grey
Show stores (11)


Sign in to comment

silkysmooth3215   Apr 21, 2019  

I like the print for the GPS module. Where could I find it?

silkysmooth3215   Apr 21, 2019 

Thanks so much!!

gwizz fpv   Dec 11, 2018  

NICE biuld mate wish i could do 3d printing could you print some for me and will pay you

irmanhilmi   Dec 11, 2018 

thanks man. shipping might be killer as I'm in Malaysia.

Guides & Reviews

46 6,437  79
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more