Building a 65mm brushless whoop with 0802 motors.

12/03 - I got all the parts together for this build but the Happy Model 0802 motors do not fit in the Beta 65 Pro frame cleanly. The E-Clips at the bottom of the motor do not fit through the center holes on the frame. I drilled them out to 9/64" and used the triangle holes for the screws. The center holes distort slightly so be careful when trying to spin the motors. One of my 4 motors seems DOA and I have a message to the seller to get a replacement.

12/22/18 - I used my soldering iron to melt the E- clip holes large enough so they no longer distort. I also had to screw them down using the triangle holes rather than the round ones. I made a return of the bad 0802 motor and Crazepony sent me a whole new set. Oddly the new set had 2 black motor wires and 2 red motor wires. It seems they are dirrctional. My original set were all red so I wonder if my original set had some QC issue. The build finally came together and flies strong. Dry weight is 23g and I have to stay on the throttle to keep this thing moving.