Purple Haze New ZOOT 3 " frame by RotoriousFPV

By Droneless_fpv on Dec 06, 2018

12  241  6

The new ZOOT 3" by The Rotorious FPV UndergroundRotorious FPV//Jack just looks absolutely beautiful.
Absolute pleasure to build and piece together.
I call her Purple Haze.
She is kitted out with the Emax F3 Magnum Mini Stack. For the VTX you cannot beat the Eachine VTX02. She is all set up for some juicy HD footage using the Runcam Split Mini 2. Frsky RXSR receiver. On the corners are beautiful 3B Motors 1106 6000kv. I only run 3s on micros which is plenty for a build only coming in at 90g granted it's missing a battery strap and silicone pad.
The ZOOT 3" comes nicely packaged with all the components individual bagged. All the hardware and prints to make the build look super sweet. It does come with a camera mount for the micro hd cams. NOTE I chose purple stand offs from my own stash. Wanted to make the kwad as purple as I could. Stock will come with silver stand offs.
What else can I say but pick one up now available as a 2" also go check out Makeitbuildit for more details.
All I need now is for the rain to stop to give it a good old maiden. Progress of the ZOOT 3"

@rotoriousfpv #rotoriousfpv //Jack

ZOOT 2" and 3" now available at @makeitbuildit. GO AND CHECK THEM OUT

Photos

Discussion

Sign in to comment

Fargofpv   Jan 04, 2019  

Can you fit 2.5" props on the 2" frame?

Droneless_fpv   Jan 09, 2019 

its a 3" frame at the time of the build it had gemfan 2540 but now has proper 3" props fyi rmax avan

Leito_nK   Dec 09, 2018  

Man, it's realy cool kwad!
Can u share thingiverse.com your antena mounts?

Droneless_fpv   Dec 09, 2018 

its not my design. comes part of the frame kit. sorry buddy

StickyRice   Dec 08, 2018  

Dudeeee the purple looks lit!! im confused about the xt30 tho? whats on it? hahahah but still looks sweeet dude hope it rips as good as it looks!

Droneless_fpv   Dec 08, 2018 

its to hold the battery strap. and thakns for the comment 

Guides & Reviews

44 4,560  30
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
14 2,781 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more