Built this to use the new Hypetrain Brat 3" motors. Love the lightweight feel, without the lightweight power!
Frame |
XENO 3″ X frame
Quattrovolante.com
|
$29.90 |
Flight Controller |
CLRacing MINI 20x20 Flight Controller - CLF4SDefault Title
(25 builds)
Racedayquads.com
|
$46.50 |
ESCs |
Ori32 4in1 ESC 4x25A 2020
(83 builds)
Store.myairbot.com
|
$44.99 |
Motors |
4 x Hypetrain Brat 1407 4140kv Micro Motor by Rotor Riot
Rotorriot.com
|
$67.96 |
Propellers |
HQ T3x3x3PC
Pirofliprc.com
|
$1.90 |
FPV Camera |
RunCam Micro Eagle 800TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera - Red
(323 builds)
Racedayquads.com
|
$44.99 |
FPV Transmitter |
Team BlackSheep TBS UNIFY PRO NANO - Heli-Nation
(6 builds)
Heli-nation.com
|
$17.99 |
Antenna |
Lumenier AXII U.FL 5.8GHz Antenna (RHCP)
(148 builds)
Getfpv.com
|
$14.99 |
Receiver |
FrSky R-XSR 2.4GHz Micro ReceiverDefault Title
(937 builds)
Racedayquads.com
|
$21.99 |
Nice build!
What battery do you fly?
hows the motors working for you? i heard a lot of good things about it. also what if you added a bit of white around the edges? that'll make it look sooooo lit.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Can anyone recommend a good tune and rates for this build ?
I'm not much of a tuning guy. I put my standard rates on it then leave pretty much the defaults.