Babyshark with an EOS2 camera
The new canopy is amazing. 3 board stack fits nice and snug. I burned a hole in the top for my RX antenna.
Frame |
Babyshark
(9 builds)
Falconmultirotors.com
|
$25.00 |
Flight Controller |
Super_S Flytower Omnibus F3 Flight Controller Built In Betaflight OSD Dshot 6A 4 In 1 ESC BLHeli_S
(14 builds)
Banggood.com
|
$33.38 |
Motors |
4 x FlexRC FX1102 10000kv Brushless Motor - 1PCS
Flexrc.com
|
$39.96 |
Propellers |
Drone Propellers for - Drone Props
(41 builds)
Racedayquads.com
|
$3.59 |
FPV Camera |
Caddx Turbo Eos2 Nano CMOS 1200TVL 4:3 NTSC FPV Camera (2.1mm)
(4 builds)
Racedayquads.com
|
$15.99 |
does the frame now come with the new canopy or did you make it yourself. i have been wanting a frame that fits the eos2 camera.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I just finished a similar build, Super_ F4 with 1103 8000kv motors on a the Tinyshark, 2s. 44g dry weight. It's nice and zippy but I can't get the damn thing to stop bobbling in outdoor flight (I think bobbling is also there indoor too, but milder and harder to see due to lighting). Hours spent tuning to no avail. Please let us know how it flies - if good, I'd love to see your tune.
I only use the F3 Super_S stack. I had too many issues with the F4 board. Try starting your D values at 15.