KISS’d AF | RotorX Atomic Fox

By BrOverBee on Feb 19, 2019

14  453  0

I absolutely love the Atomic Fox! It's such a fun little quad - it's so small and yet has all the capability of a 5in quad. I hadn't seen anyone build a KISS'd Fox yet, so I figured I'd try! With a little creativity on the canopy, I was able to cram in an ImpulseRC Codelayer Wolf PDB. If you know KISS, you know know that a PDB like this is a huge quality of life improvement and I hold it to be true that there's no better OSD system out there than KISS OSD.


Part List


RotorX Atomic Fox 5" (12 builds)

Flight Controller

KISS FC 32bit Flight Controller (180 builds)


4 x KISS ESC 2-5S 25A (40A limit) - 32bit brushless Motor Ctrl (3 builds)


4 x Limited Edition* Matte Red 2306 2550kv Rebel Motor (2 builds)


DAL Cyclone T5050C Pro Tri-Blade 5" Prop 4 Pack - Choose Your Color (9 builds)

FPV Camera

RunCam Micro Eagle Pro "Rotor Riot Joshua Bardwell Edition" 800TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera - BlackDefault Title (24 builds)

FPV Transmitter

ImmersionRC Tramp HV 5.8GHz Video Tx - (International Version) (140 builds)


Lumenier AXII 5.8GHz Antenna (RHCP) (2pcs) (199 builds)


TBS Crossfire Micro Receiver V2 (278 builds)


Indestructible Quads "Black Label" 4S True 80C Racing LiPo 1300mAh/1500mAh Battery V2 (34 builds)

Power Distribution

ImpulseRC Reverb PDB OSD (Codelayer Wolf)


FrSky 2.4G ACCST System Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include (218 builds)

HD Camera

Insta360ONE Action Camera (iOS)

HD Camera

GoPro HERO5 Session (267 builds)

HD Camera

GoPro Session (59 builds)

Misc Parts

GoPro Session Armor (5 builds)
Show stores (11)


Sign in to comment

Guides & Reviews

29 1,565  11
25 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,031  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more