This build was built by Anthony at Baltimore Drone Service
www.baltimoredroneservice.com
I do apologize for the clone frame but I have grown very fond of this frame and find it to be exactly what I want in a frame and knowing where the majority of them originate from, I find "clones," to work just fine in most cases. The idea behind this build was to go for maximum performance at minimum cost which seems to be what everyone is looking for these days, I mean it just makes sense. You will see that I utilized the "DYS Samguk" motors in this build, the one thing you cannot see is that during this build I replaced the factory Samguk bearings with an aftermarket set which I am very happy with and highly recommend to anyone thinking about using the samguk motors for an exteded period of time. Please feel free to message with any questions or to find out more about our builds and projects please visit our companys website at www.baltimoredroneservice.com
Flight Controller |
DYS F4 Flight Controller (Poker Face)
(140 builds)
Getfpv.com
|
$38.99 |
Motors |
4 x DYS Samguk Series Shu 2306 2500kv Motor
(31 builds)
Getfpv.com
|
See Site |
Propellers |
Azure Power 5150x3 SERIES
Pirofliprc.com
|
$3.29 |
FPV Camera |
RunCam Swift 2
(202 builds)
Shop.runcam.com
|
$44.99 |
FPV Transmitter |
AKK FX3 Ultimate Mini 20x20 25-600mW 5.8GHz VTX - MMCX & U.FLDefault Title
(142 builds)
Racedayquads.com
|
$21.99 |
Receiver |
FrSky XM+ SBUS Mini Receiver
(1149 builds)
Getfpv.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I run these motors on one of my builds, how a bout link to those bearings?
as much as I dont like using ebay, here is the best place to get cheap but quality bearings.
https://www.ebay.com/i/263165710123?chn=ps