Proton in skeleton mode with 5 inch practice arms.
VTX-antenna will be replaced with AXII stubby.
Frame |
FlightClub PROton | Race Drone Frame - FPV FlightClub
(17 builds)
Fpv-flightclub.com
|
$65.00 |
Flight Controller |
FlightOne RevoltOSD
(32 builds)
Shop.flightone.com
|
$44.99 |
ESCs |
Spedix GS40 40A 2-6s 4-In-1 ESC
(6 builds)
Pirofliprc.com
|
$66.99 |
Motors |
4 x TMotor F40 PRO II - 2400KV
(24 builds)
Getfpv.com
|
$99.60 |
Propellers |
DAL 5x4.6 - 3 Blade, Black Cyclone Propeller - T5046C (Set of 4)
(391 builds)
Getfpv.com
|
$1.99 |
FPV Camera |
RunCam Micro Eagle 800TVL WDR 16:9/4:3 CMOS FPV Camera
(323 builds)
Getfpv.com
|
See Site |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (SMA)
(197 builds)
Getfpv.com
|
See Site |
Antenna |
EMAX Pagoda 3B 5.8G 30mm Long RHCP/LHCP Stubby W/ SMA Male by Maarten Baert FPV VTX Antenna
Banggood.com
|
$5.99 |
Receiver |
Radiolink R12DSM 2.4G 12CH DSSS FHSS Receiver for AT9 AT9S AT10 AT10II Transmitter
(7 builds)
Banggood.com
|
$15.99 |
Radio |
AT9 2.4GHz 9CH remote control system,TI CC2533,ST,ARM M3 - RadioLink Electronics Co., Ltd.
Radiolink.com.cn
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi, nice build, what is the range with that way of 2.4ghz antenna position?
Hi, Sorry for my late reply. I have not been logged in to Rotorbuilds for a while.
Not sure about the range really but I have never had any problems with it, failsafes etc.