True HD Brushless Whoop

By airbladeuav on Jan 18, 2019

19  833  1

I have this prototype frame made a while ago and I never really found a good use for it. Then comes the HD brushless whoop wave. But what I really don't like is that people have been using is their Beta75X and slap on a HD camera. The 40mm prop on 2S simply can't offer enough power to carry such a heavy rig. So I decided to make my own with 1.9 inch prop. This frame was made to accommodate up to 2.5 inch but now with the 1.9 inch guard, it leaves some room to put the camera in between the ducts. PERFECT!

I use parts that I have lying a round, but my intended setup would use a HGLRC Zeus with a small VTX and a Caddx Turtle or Split Mini single board. That way you can really keep the stack low, and possibly under the duct.


Part List

Flight Controller

HGLRC F4 Zeus - TX20 V2 F405 Flight Controller


4 x AirBlade AB 1105 10000kV 2S-3S Brushless Racing Motors (flexible wires) - Single motor (12 builds)


GemFan HULKIE 1940-3 PC PropellerRed (10 builds)

FPV Transmitter

Team BlackSheep TBS Unify Pro Nano 5G8 Video TransmitterDefault Title (5 builds)


FrSky XM SBUS Micro Receiver (16 builds)


Tattu 650 mAh 2S 7.4V 75C with XT30


Team BlackSheep Tango 2 PRO Crossfire Radio Controller (3 builds)


DJI Digital HD FPV Goggles (4 builds)

HD Camera

Insta360 GO FlowState Stabilization (4 builds)

Video Receiver

Furious FPV True-D X Diversity Receiver System (for FatShark Dominators)

Radio Module

Team BlackSheep Crossfire Micro TX V2 Starter Set

Battery Charger

iSDT 608AC Smart Battery Charger BattGo

Soldering Iron

TS 100 SOLDERING IRON (B2) (179 builds)



Misc Supplies

Ethix Quad-builder Cable Set
Show stores (1)


Sign in to comment

Scott in Tokyo   Feb 01, 2019  

Love to see some videos, weight and flight time info. .

Guides & Reviews

52 3,903  44
25 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
35 2,605  18
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more