Floss 3.0 #2 hybrid

By M490fpv on Feb 09, 2019

19  993  12

This is my season 2019 technical stage rig #2, identical to my orange/black Floss 3.0
The canopy is a design of my friend and has a detachable crash flip fin. I will try different materials for the fin to find the best hardness. Now it is TPU 98A,
Arm protectors are to Floss 2, but fit in just fine until some better ones come available: https://www.thingiverse.com/thing:2874494
No fancy wire hiding or anything like that. This is a race rig and all components and wires need to be easily accessible for quick swap.
Canopy screws are rainbow colored titanium screws. Gives some nice look.

switched the 6" rear arms to this frame to test the new hybrid hype.

Photos

Part List

Frame

Hyperlite Floss 3.0 Race Frame "5 INCH" (15 builds)
Pyrodrone.com
$44.99

Flight Controller

HyperLite F4 OSD
Flyrcnow.com
$32.99

ESCs

Airbot Typhoon32 35A 4-in-1 ESC V2 (10 builds)
Getfpv.com
$59.99

Motors

4 x Returner R6 2205 Rainbow Motor (CW) (5 builds)
Brotherhobbystore.com
$79.96

Propellers

Gemfan Flash Durable 5149-3 CHOOSE COLOR (18 builds)
Pyrodrone.com
$3.29

FPV Camera

Runcam Micro Eagle (302 builds)
Pyrodrone.com
$44.99

FPV Transmitter

TBS Unify Pro 5G8 HV - Race (MMCX) (5 builds)
Team-blacksheep.com
$23.95

Antenna

Lumenier AXII MMCX 5.8GHz Antenna (RHCP) (70 builds)
Getfpv.com
$14.99

Receiver

FrSky XM+ SBUS 2.4GHz Mini ReceiverDefault Title (1404 builds)
Racedayquads.com
$12.99

Batteries

TATTU R-Line 1050mAh 6s 95C Lipo Battery (42 builds)
Getfpv.com
$35.99
Show stores (6)

Discussion

Sign in to comment

Boosta   May 13, 2019  
1

where i can got stl for canoppy ?

Show 2 more comments
Pounii   May 22, 2019 

Same question here :)

Cazawiro   May 22, 2019 

May I also ask for that? really like it. thanks in advance

Boosta   May 23, 2019 

unfortunatley I am not alloud to share that stl file please contact owner of that build

Txcolt   May 17, 2019  
1

Beautiful, inspired me to build one myself since I am looking to get into racing. Will upload photos when complete,

crepitus   Feb 11, 2019  
1

i like those 5149s on the floss3 as well. also been messin around with the dal 5249 and they fly great on a hybrid configuration but surprisingly are anlot noiser in bbox than the gf 5149. great lookin build!

Show 1 more comment
crepitus   May 13, 2019 
1

hybrid is just arm length difference - at least in all ive seen including mine. still same prop just getting the rear props slightly better air in hard aggressive maneuvers.

Boosta   May 14, 2019 

Thank You Buddy i was just thinking about that !! regards Adrian

M490fpv   May 14, 2019 

Yes, the hybrid frame gives more clean air to rear motors. No larger props in the rear.

Guides & Reviews

39 3,788  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,651  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more