Marauder

By TheMrJahn on Mar 23, 2019

12  459  0

Upgrading all my squad to f7 flight controllers and some drones are mostly completely have new hardware. That is what exactly happened with Intruder (https://rotorbuilds.com/build/8193). While upgrading that drone i decided to replace frame, vtx, pdb and antenna. To be able to use up to 6s lipos i installed bigger capacitor - 2200uF 50v. So i get completely new build using old motors, escs (they are great and i don't want to change them) and camera.
New build means a new name. Name Marauder match this drone perfectly.

UPD Replaced camera with Foxeer Mix (first generation).

Photos

Discussion

Sign in to comment

Guides & Reviews

27 2,075  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more