TX
R9MLite using Super 8 antenna
RX
R9MM using dipole with 74mm elements
RSSI sent back to rx from tx according to:
https://oscarliang.com/rssi-ppm-channel-taranis/
Frame
GT R249+
Stack
Mamba F405 mini
Props
Gemfan 2540
GPS
M8Q5883
VTX
TBS Unify HV using LHCP Axxi micro antenna
Motors
LDARC 1104 5500Kv
Camera
Caddx Turtle v1
Wind 15MPH
diff all and logs
https://drive.google.com/file/d/1oytShqjDI4gghIGsDYeJoaJSh2sfoaEI/view?usp=sharing
I have a similar setup to yours, how do you connect the GPS, assuming that your Unify uses TX3 and Crossfire uses TX6+RX6? Do you simply connect the GPS using TX3+RX3 and assign them on BF? (with Smartaudio on TX3 as well for your Unify)?
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I wonder how you connected compass to Mamba F405? It does not have I2c port labeled.
i just solder and flipped till it worked but I don't even use it much anymore...
the i2c pads are on the bottom of the board where the white and green wire are connected
tnx