Hats off to Armattan Pro. for re-sending this thing twice at no extra cost to me. (post office failed to notify me 2x)
Just a oneoff design, playing around with the concept of a vertical+horizontal arm members.
16mm stack space, which is enough these days for stacks like this, but no, I just transplanted some old parts and had to fit the VTX on top.
Like the re-purposed Emax foam on the arms? ...need to 3d print some.
Anyway, not the prettiest thing but Blackbox logs look amazingly vibe-free and it flies good.
Photos
Part List
Flight Controller |
Holybro Kakute F4 V2 STM32F405 Flight Controller With Betaflight OSD for RC Multirotor FPV Racing Drone
Banggood.com
|
$36.00 |
ESCs |
4 x Spedix ES30 HV 3-6s BLHeLi_S 30A ESC
(29 builds)
Getfpv.com
|
See Site |
Motors |
4 x EMAX LS2206 Lite Spec 2206 1700KV 2300KV 2550KV 2700KV CW Thread FPV Racing Brushless Motor for RC Drone
(10 builds)
Banggood.com
|
$71.96 |
FPV Camera |
RunCam Micro Swift 3 FPV Camera (2.1mm)
(4 builds)
Getfpv.com
|
$36.99 |
is this a race build?
I like the racing form factor, so that's how I designed it. But it's over 300g so wouldn't work out too well in real races I'd bet.
Really nice work! How much does the frame weigh?
Thanks. Not too light. Didn't measure it, but 85 grams of carbon (per CAD model) and I'd guess 100 grams with screws and standoffs.
100g is actually pretty good for a vertical design! Top and bottom + arms are two identical plates rotated by 180° right? really cool idea!
Yep, 180d. Those plates were most of the cost, so unfortunately not an idea I'd do again.